Maserati Sfida Skeleton Automatic 44 mm in Grey PVD Steel with Blue Sunray Details
This Maserati Sfida skeleton automatic is a 44 mm men’s watch finished in grey. The stainless steel case and bracelet carry a PVD coating, the dial is a transparent skeleton, and parts of that dial are cut with a blue sunray finish. The result is a dark, technical-looking watch where the only strong colour comes from the blue elements around the open movement. The crystal is sapphire with an anti-reflective coating, and the case is rated to 10 ATM.
Maserati is the Italian marque founded in Bologna in 1914, and Sfida, which translates as “challenge”, is the name it gives to its larger-case watch family. This reference is the grey, blue-accented take on the skeleton automatic formula.
Case and Wrist Presence
The case is round, 44 mm wide, and made of stainless steel with a grey PVD coating. PVD, short for physical vapour deposition, is a hard-wearing surface treatment that bonds a thin coloured layer to the steel. It gives a deeper, more uniform grey than polishing alone could, and it generally resists everyday abrasion well, although sharp knocks against rough surfaces can still mark any coated finish over time.
A dark case reads as slightly smaller and more discreet than the same case in bright steel, which is a useful trait at 44 mm. The sapphire crystal has an anti-reflective coating, so the open dial stays easy to see under bright lights instead of disappearing behind glare.
- 44 mm round case – a large, assertive size
- Grey PVD-coated stainless steel – a dark, uniform finish
- Sapphire crystal with anti-reflective coating – clear view of the open dial
- 10 ATM water resistance – suitable for swimming
The Skeleton Dial with Blue Sunray
A skeleton dial removes most of the solid plate and lets you see the movement. Here, the open structure is combined with blue elements that have a sunray finish, meaning fine brushed lines that radiate outward from the centre and flash brighter or darker as the light changes. Against the grey case and the metallic parts of the movement, these blue surfaces give the watch a clear focal colour.
The watch shows the hours, minutes and seconds with no further complications, so the dial remains uncluttered. The specification does not list a date window or a chronograph. Because a skeleton dial is open, its legibility depends on the contrast between hands and the parts behind them, so it is worth looking at the watch in different lights.
- Transparent skeleton dial – the mechanism is in view
- Blue sunray elements – a bright accent in a dark watch
- Hours, minutes and seconds – simple and easy to use
Automatic Movement
Inside is an automatic mechanical movement. As you move your wrist, a rotor winds the mainspring, so the watch runs without a battery and does not need to be wound each day when worn regularly. A watch left unworn for a while may stop and can be restarted with a few turns of the crown. The seconds hand sweeps smoothly across the dial instead of ticking, a feature of mechanical watches that many owners enjoy watching.
The accuracy of a mechanical movement is lower than that of quartz, and small differences of a few seconds per day are normal. Resetting the time every few weeks keeps it close to exact.
Grey Steel Bracelet
The bracelet is stainless steel in a grey tone that matches the coated case. A single colour from case to strap gives the watch a uniform look, and it makes the blue elements on the dial stand out. A watchmaker can adjust the length for a snug fit. Since the case is large, the bracelet should be sized so that the watch does not slide around the wrist or sit too tight, which would add pressure on the case back.
Water Resistance in Daily Life
With a rating of 10 ATM, which means 100 metres of static test pressure, the watch is made for rain, handwashing, showering and swimming, including snorkelling near the surface. It is not designed for scuba diving. Make sure the crown is pushed fully in before it touches water and do not use it while the watch is wet. Rinse the watch with fresh water after salt water or chlorine, dry it with a soft cloth, and avoid hot baths or saunas.
Who This Watch Suits
- Men who like dark, coated cases and a restrained colour palette
- Buyers who want a mechanical watch with the movement on show
- Wearers who prefer a metal bracelet and like a single colour from case to clasp
- Fans of Italian car marques looking for a mechanical piece with a recognisable name
The grey finish suits casual outfits and dark business clothing. The blue accents add interest without asking for a colour-matched outfit, and the large case works best on medium to large wrists.
Care and Maintenance
Wipe the case and bracelet with a soft, dry cloth after wearing. Avoid abrasive cloths, polishes and rough surfaces, which can wear through a PVD coating. Keep the watch away from strong magnets, including speakers and magnetic phone cases, which can affect the rate of a mechanical movement. Avoid dust and sand around the open dial, and take care with sudden knocks.
A mechanical watch should be serviced by a qualified watchmaker every few years. The service includes cleaning, oiling and replacing seals, and the water resistance should be checked again afterwards so the 10 ATM rating continues to be reliable.
About the Sfida Collection
Sfida covers Maserati’s larger watches in automatic, quartz and chronograph form. This reference belongs to the skeleton automatic group, and it distinguishes itself from the plain steel versions by using a grey coated case and blue sunray dial parts.
Technical Specifications
| Brand | Maserati |
|---|---|
| Collection | Sfida (Skeleton Automatic) |
| Reference | R8823140015 |
| Gender | Men’s |
| Case diameter | 44 mm |
| Case material | Stainless steel, grey PVD coating |
| Dial | Transparent skeleton with blue sunray elements |
| Crystal | Sapphire, anti-reflective coating |
| Movement | Automatic mechanical |
| Functions | Hours, minutes, seconds |
| Bracelet | Stainless steel, grey |
| Water resistance | 10 ATM (100 m) |

