Anycubic Standard Resin V2 1kg – HD Grey

Enhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for faster, cleaner results | Low-odour formulation | Compatible with all 405nm LCD/DLP printers The Anycubic Standard Resin V2 in HD Grey is a reformulated photopolymer resin designed for makers, hobbyists, and professionals who demand both precision and durability from their LCD/DLP prints. Its enhanced toughness formula produces models that resist drops and impacts, flex without brittle fracture, and balance strength with ductility — making it well suited to action figures, consumer electronic shells, tooling fixtures, snap-on parts, and load-bearing structural components. A low-viscosity formulation promotes fast bubble dissipation and excellent resin flow, reproducing fine surface details and reducing overall print time. With a 4.3% volumetric shrinkage rate, the resin delivers superior dimensional accuracy and deformation resistance so your models come out true to design. The low-odour formulation keeps the printing environment comfortable, and broad compatibility with all 405nm UV-curing LCD/DLP printers means it slots into your existing workflow without fuss. Pre-configured profiles are available in Anycubic’s Photon Workshop slicer, so you can achieve consistent, high-quality results from the very first print. Features Reformulated for enhanced toughness — models resist impact and flex without brittle fracture 4.3% volumetric shrinkage rate for superior dimensional accuracy and deformation resistance Low-viscosity formula with fast bubble dissipation for cleaner surface detail and reduced print time Low-odour formulation for a more comfortable printing environment Compatible with all 405nm UV-curing LCD/DLP 3D printers Pre-configured Photon Workshop slicer profiles for consistent print success Clean with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW/cm² Specifications Colour: HD Grey Resin Size: 1kg Pre-print preparation: Shake well before use Print environment:20-40 ℃ First layer exposure duration: 20-40 s Normal exposure duration: 2.5-3 s Print temperature: 20-50 ℃ Material: Photopolymer Resin Wavelength: 365-405 nm Viscosity: 250-350/mPa·s(25℃) Density: 1.05-1.25/g/cm³ Hardness: 80-83 HD Tensile Strength: 35-45 MPa Elongation at Break: 25-30% Bending Modulus: 40-50 MPa Bending Strength: 1500-2100 MPa Young’s Modulus: 1200-1400 MPa Izod Impact Strength: 192 J/m Volume Shrinkage Rate: 4.3-5.6% Cleaning: 95% IPA Washing duration: ≥3 mins UV Wavelength: 405 nm Curing Temperature: 18-30 ℃ UV Intensity: 25000-30000 uW/cm² Curing time: 3 mins Disposal: Post-UV-curing resin is treated as plastic waste What’s in the Box Anycubic Standard Resin V2 – HD Grey x1