Anycubic PLA Silk Dual Filament – Black Green

Silk-lustre dual-colour PLA filament | Striking Black Green gradient finish | Adjustable gloss via temperature and speed | Compatible with 0.4 mm+ nozzles | 1 kg spool The Anycubic PLA Silk Dual Filament in Black Green is designed for makers and hobbyists who want their prints to stand out with a rich, layered aesthetic. Combining deep black and bold green in a single strand, this dual-colour silk PLA produces a flowing gradient effect that shifts and catches the light from every angle, giving decorative prints, fan art, and artworks a premium, polished look. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed delivers a high-gloss silky surface, while cooler, faster settings yield a subtler sheen. Compatible with any FDM printer using a 0.4 mm or larger nozzle, it runs cleanly at 210–240 °C with a heated bed set between 55 and 56 °C, and prints reliably at speeds from 50 up to 250 mm/s. Dry the filament at 55–65 °C for 6–8 hours before use for best results. Features Black Greencolour blend produces a lustrous, metallic silk finish 1kg spool for extended printing sessions and larger projects PLA-based material — easy to print and widely compatible with FDM printers Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition Resilient and flexible — tested to resist breakage during feeding and multi-colour operation Prints at 210–240 °C nozzle temperature; heated bed at 55–56 °C Recommended print speed: 50–250 mm/s Reusable filament spool with threaded locking system to reduce entanglement Specifications Colour: Black Green Package Weight: 1 kg Dry Out Before Use: Recommended Drying Condition: 55-65℃, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 ℃ Heated Bed Temperature: 55-56 ℃ Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm³/s Density: 1.22 g/cm³ Melt Index: 9±1 g/10 min (190℃/2.16kg) Melting Point Temperature: 164 ℃ Vicat Softening Temperature: 54 ℃ Heat Deflection Temperature (0.45MPa): 53 ℃ Young’s Modulus: 2000±200 MPa Tensile Strength: 37±4 MPa Elongation at Break: 28±5% Bending Modulus: 2400±160 MPa Bending Strength: 66±4 MPa lzod lmpact Strength (X-Y): 20±2 kJ/m² Tensile Strength (Z): 12±4 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported What’s in the Box Anycubic PLA Silk Dual Filament – Black Green x1