Anycubic PLA Silk Dual Filament 1kg – Red/Blue

Silk-gloss dual-colour PLA filament | Gradient colour shifting in a single pass | Adjustable luster via temperature and speed | 1 kg per roll | Compatible with all 1.75 mm FDM printers The Anycubic PLA Silk Dual Filament in Red/Blue is designed for makers who want visually striking, multi-toned prints without the complexity of a multi-extruder setup. The dual-colour construction produces a rich gradient effect that shifts across the model’s surface as each layer is laid down, delivering a premium silk-like luster that catches the eye from any angle. You can fine-tune the finish by adjusting nozzle temperature and print speed — a higher temperature or slower speed produces a smoother, higher-gloss surface, giving you direct control over the final look. Compatible with any FDM printer that accepts 1.75 mm filament, it prints at a nozzle temperature of 210–240 °C with a heated bed at 55–56 °C and supports speeds from 50 to 250 mm/s. Each roll weighs 1 kg and is rated for decorative parts, fan art, and artistic models where appearance is the priority. Features Dual-colour construction produces a seamless gradient effect across printed surfaces in a single pass Silk-like luster that shifts and deepens when the model is rotated, adding visual depth and a premium feel Adjustable finish — increase nozzle temperature or reduce print speed for a higher-gloss, smoother surface Compatible with all 1.75 mm FDM printers; no multi-extruder setup required Supports Anycubic ACE Pro intelligent identification for automatic filament recognition (internet connection required) Reusable spool with threaded locking system reduces entanglement and filament scatter Certified to RoHS, REACH, and SDS standards Specifications Colour: Red Blue (#E63888,#003594) Dry Out Before Use: Recommended Drying Condition: 55-65℃, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 ℃ Heated Bed Temperature: 55-56 ℃ Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm³/s Density: 1.22 g/cm³ Melt Index: 9±1 g/10 min (190℃/2.16kg) Melting Point Temperature: 164 ℃ Vicat Softening Temperature: 54 ℃ Heat Deflection Temperature (0.45MPa): 53 ℃ Young’s Modulus: 2000±200 MPa Tensile Strength: 37±4 MPa Elongation at Break: 28±5% Bending Modulus: 2400±160 MPa Bending Strength: 66±4 MPa lzod lmpact Strength (X-Y): 20±2 kJ/m² Tensile Strength (Z): 12±4 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported Size: 1KG What’s in the Box Anycubic PLA Silk Dual Filament 1kg – Red/Blue x1