Anycubic PETG Solid Filament – Black

Durable PETG filament | Impact and weather resistant | Chemical resistant | 1KG spool | Black (#212721) The Anycubic PETG Filament in Black is a reliable choice for makers who need printed parts that can take a knock and keep going. PETG strikes the balance between the ease of PLA and the toughness of ABS, making it well suited to functional parts, enclosures, and everyday-use prints that demand real durability. Its resistance to impact, moisture, and a range of chemicals means printed parts hold up in demanding environments — not just on a shelf. The 1KG spool of deep black (#212721) filament feeds consistently for clean, predictable results print after print. Features PETG material — durable and impact resistant for functional prints Water and weather resistant for indoor and outdoor applications Chemical resistant construction holds up in demanding environments Deep black colour (#212721) for clean, professional-looking results 1KG spool for extended printing sessions Specifications Supporting Filaments: PETG Colour: Black (#212721) Spool Size: 1kg Dry Out Before Use: Required Drying Condition: 55-65 °C, 6-8 h ACE Compatibility: Compatible Nozzle Size: Recommended 0.2 mm or above Printing Temperature: 230-250 ℃ Heated Bed Temperature: 60-70 ℃ Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 12 mm³/s Density: 1.23 g/cm³ Melt Index: 25±3 g/10 min (250℃/2.16kg) Melting Point Temperature: 130 ℃ Vicat Softening Temperature: 72 ℃ Heat Deflection Temperature (0.45MPa): 69 ℃ Young’s Modulus: 1850±100 Mpa Tensile Strength: 52±1 Mpa Elongation at Break: 13±1% Bending Modulus: 2000±50 Mpa Bending Strength: 80±2 MPa lzod lmpact Strength (X-Y): 45±2 kJ/m² Tensile Strength (Z): 31±3 MPa Filament Type: General filaments Recommend to Print: Toys, decorative parts, and fandom Intelligent Identification: Supported Reusable Filament Spool: Supported What’s in the Box Anycubic PETG Solid Filament – Black x1